KRY 45 MP
DOVETAIL LOCK WITH MOUNTING PLATE
KRY 45 MP WITH MOUNTING PLATE
Dovetail type twistlock; 45-degree
• Proof tested in tension to 250KN
• Proof tested in shear to 210KN
• Minimum Breaking Strength (MBS) in tension at 500KN
• Minimum Breaking Strength (MBS) in shear at 420KN
Weight: 14.8 lbs/6.7 kg plus Baseplate weight
Designed and developed to connect military tricons and quadcons into a single unit.
Also used for connecting two 10' tank containers into a single 20' unit.
BLR 1212Weight: 12.6 lbs/5.7 kg
- Ease of operation
- Proven in-service use
- Approved by US Naval Civil Engineering Laboratory
- Can be used in the end wall aperture of lower corner fittings, or the side wall apertures of upper and lower corner fittings.
TRICON & QUADCON INTERCONNECTOR
In excess of half a million units in service with the Marines and Army and proven over 15 years service. Used to join tricons and quadcons together.
Weight:10.4 lbs/4.7 kg
END APERTURE PULL LUG
Can be attached to the end aperture of an ISO corner casting and/or side apertures of upper and lower corner castings; once twisted into position, a spring-loaded pin prevents accidental removal.
1. Insert lug into oval-shaped end aperture until it stops
2. While depressing the spring-loaded pin, rotate lug 90 degrees in either direction
3. Pull lug back out until pin extends
4. To remove, reverse the operation
END APERTURE SCREW-DOWN LOCK
This twistlock is used on military container-handling equipment; it fits into the lower end aperture of an ISO corner casting; then the head is actuated 90 degrees and the handnut tightened creating a solid connection between the handling equipment and the ISO container.
CAST STEEL LOCATING CONE
10” x 3” FIXED, POLY/STEEL WHEEL
FLATRACK HELLILIFT "D" RING
KRY1050 (D ring) / KRY 1051 (bracket)
"D" RING AND BRACKET
KRY1307 "D" Ring and KRY1306 Bracket
FABRICATED BAIL BAR
BEARINGLESS REAR ROLLER