KRY 45 MP
DOVETAIL LOCK WITH MOUNTING PLATE
KRY 45 MP WITH MOUNTING PLATE
Dovetail type twistlock; 45-degree
- Proof tested in tension to 250KN
- Proof tested in shear to 210KN
- Minimum Breaking Strength (MBS) in tension at 500KN
- Minimum Breaking Strength (MBS) in shear at 420KN
- Weight: 14.8 lbs/6.7 kg plus Baseplate weight
BLR 1212
INTERCONNECTOR
Designed and developed to connect military tricons and quadcons into a single unit.
Also used for connecting two 10′ tank containers into a single 20′ unit.
BLR 1212
- Ease of operation
- Proven in-service use
- Approved by US Naval Civil Engineering Laboratory
- Can be used in the end wall aperture of lower corner fittings, or the side wall apertures of upper and lower corner fittings.
- Weight: 12.6 lbs/5.7 kg
D 1015
TRICON & QUADCON INTERCONNECTOR
D 1015
In excess of half a million units in service with the Marines and Army and proven over 15 years service. Used to join tricons and quadcons together.
Weight:10.4 lbs/4.7 kg
KRY 6372
END APERTURE PULL LUG
KRY 6372
- Insert lug into oval-shaped end aperture until it stops
- While depressing the spring-loaded pin, rotate lug 90 degrees in either direction
- Pull lug back out until pin extends
- To remove, reverse the operation
BLR 4322
END APERTURE SCREW-DOWN LOCK
BLR 4322
This twistlock is used on military container-handling equipment; it fits into the lower end aperture of an ISO corner casting; then the head is actuated 90 degrees and the handnut tightened creating a solid connection between the handling equipment and the ISO container.
KRY3000
10” x 3” FIXED, POLY/STEEL WHEEL
KRY3000
Load Rating: 3000
Type: Fixed
Size: 10 x 3
Wheel Material: Poly/Steel
Our custom made twist lock body and stem offer maximum efficiency and strength
Cast, forged & welded construction ensures maximum strength and durability
Heavy-duty wheel and yoke bearings for trouble-free operation
KRY1050/KRY1051
FLATRACK HELLILIFT “D” RING
KRY1050 (D ring) / KRY 1051 (bracket)
KRY 1050/KRY 1051
Forged steel “D” ring and bracket. 73,000 lb. design load
KRY 1306/KRY 1307
“D” RING AND BRACKET
KRY1307 “D” Ring and KRY1306 Bracket
KRY1306/1307
Multi-purpose D ring and bracket; 25,000 lbs. proof load (11.4 tonne)
KRY 1060
BAIL BAR
KRY 1060
For carriage of ‘A’ Frame Flatracks
Weight: 38.6 lbs/17.5 kg
BLR 4190
FABRICATED BAIL BAR
BLR 4190
Heavy duty, high strength, cast steel Bail Bar as used on M1077 military flatracks, proof tested to 30 ton; can also be used on commercial applications.
PK16906 UHMWPe
BEARINGLESS REAR ROLLER
***Please note, not all of our products are listed on our website.
To inquire about a custom product, or a part that is not shown,
please contact our main office, or send us an email***